Auto Service World
News   December 19, 2012   by Auto Service World

Ford Power Stroke Engine Training Coming To Toronto

Instructor Mike Cleary is an eight time award winning Ford Motor Company Certified Senior Master Technician and Powerstroke Engine Specialist.

He was a founding board member of Ford Motor Company’s Professional Technician Society, an organization dedicated to serving the needs of Ford dealership technicians in the United States and Canada. He has served on two separate Ford National Technician Advisory Boards, and received national recognition from Ford Motor Company for his contributions to Ford as a field technician involved in improving the 6.0L Powerstroke Engine Program.

As a member of Ford’s IDS (Integrated Diagnostics Software) beta team, he provides field feedback to Ford regarding how IDS performs on Ford’s newest vehicles. He is an ASE Certified Master Technician in both the Automobile and Heavy Truck categories, as well as being L1 and L2 Certified. He is also certified by the state of California as an Advanced Emission Specialist Technician, and University, Fresno. He has been a member of the Society of Automotive Engineers since 1981.

Classes run January 18, 19 & 20th at the Hampton Inn—(Toronto Airport) 3279 Caroga Drive; Mississauga, ON L4V 1A3

Seminar Outline: (6.0 & 6.4L Daignostics Classes)

  • Powerstroke systems operation
  • Powerstroke subsystem strategies and operating systems
  • How to diagnose and repair the most common fault codes
  • Increase your knowledge of various electronic engine control system components
  • Troubleshooting shortcuts to increase your efficiency
  • Analyze actual case studies in order to become more effective with your diagnostic skills
  • Emissions and Fuel Economy Topics
  • Technical Tips, Technical Service Bulletin Info, unpublished “Need To Know” service info
  • Don’t Need The 6.0L Class? Do you Know:
  • High pressure oil rail check valve testing?
  • Revised fuel pressure test procedures?
  • Additional info for turbocharger “Learn” process?
  • FICM disassembly and testing?
  • Revised “Balloon Test” procedures?
  • Introduction of customized IPR block off tool?
  • Supplemental test procedures for CKPO and CMPO circuit tests?
  • High Pressure Oil Pump replacement warnings?
  • EGR and Oil cooler replacement warnings?
  • How to “dead-head” the low pressure oil system to check pressure?
  • Rad Kit A Testing?PCM Resets?

Seminar Outline: (Introduction to the 6.7L Class)

  • High Pressure Fuel System
  • Dual Cooling Systems
  • EGR System and Dual EGR Cooler
  • Lubrication System
  • Air Management System
  • Exhaust After Treatment System
  • Emissions and Fuel Economy Topics
  • Injector Replacement Procedures and QA Programming
  • Maintenance and Service Procedures

Ford 6.0L, 6.4L & 6.7L

Powerstroke Training Questions & ATSS—Mike Cleary

REGISTRATION: 177 N. Sunnyside Avenue; Suite #106

Clovis, CA; USA 93611

Phone: (559) 325-3546

Fax: (559) 325-3547


Note: All prices are in U.S. Dollars

6.7L PSD CLASS: 6:30 PM to 9:30 PM; Friday, Jan. 18, 2013; Price: $149.00 by Dec. 21, 2012; $179.00 after

6.0L PSD CLASS: 8 AM to 5 PM; Saturday, Jan.19, 2013; Price: $299.00 by Dec. 21, 2012; $329.00 after

6.4L PSD CLASS: 8 AM to 5 PM; Sunday, Jan. 20, 2013; Price: $299.00 by Dec. 21, 2012; $329.00 after

LOCATION: Hampton Inn—Toronto Airport

3279 Caroga Drive; Mississauga, ON L4V 1A3

Bonus: Register For all 3 classes by Dec. 21, 2012, and pay only $727.00

Print this page


Have your say:

Your email address will not be published. Required fields are marked *